Sebring V6-2.5L VIN N (1997)
Transmission Speed Sensor: Testing and Inspection
Input Speed Sensor Check
INPUT SPEED SENSOR CHECK
(1) Disconnect the input speed sensor connector.
(2) Measure the resistance between the input speed sensor side connector terminals 1 and 2.
Standard value: 0.3k-1.2k ohms
(3) If the resistance is outside the standard value, replace the input speed sensor.
Output Speed Sensor Check
OUTPUT SPEED SENSOR CHECK
(1) Disconnect the output speed sensor connector.
(2) Measure the resistance between the input speed sensor side connector terminals 1 and 2.
Standard value: 0.3k-1.2k ohms
(3) If the resistance is outside the standard value, replace the output speed sensor.