Sebring Convertible L4-2.4L VIN X (2004)
10. Turn steering knuckle so the front of the steering knuckle is facing as far outboard in the wheel well as possible. Using a hammer strike steering
knuckle boss until steering knuckle separates from stud of lower ball joint (Fig. 8). When striking steering knuckle, care MUST be taken not to hit
lower control arm or ball joint grease seal.
NOTE: Care must be taken not to separate the inner ON joint during this operation. Do not allow driveshaft to hang by inner ON joint. Driveshaft
must be supported.
