Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Amplifier: Description and Operation
CIRCUIT OPERATION
The power Amplifier is used in the premium system only. It is placed between the radio and the speakers. The feed for the Amplifier is provided
on the F30 circuit.
The F30 circuit is protected by a 20 Amp fuse located in cavity 8 of the junction block. Circuit F30 is spliced and provides power to the horns and
the cigar lighter. Ground is provided on the Z1 circuit and terminates at the instrument panel left side cowl.
An additional feed input to the power Amplifier is on circuit X60. This circuit is HOT when the radio is in the ON position.
Circuits P5 and P6 also connect to the power Amplifier. These circuits are spliced in with the power top switch.
