Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Trunk / Liftgate Solenoid: Description and Operation
CIRCUIT OPERATION
The deck lid release system uses a switch, located in the center console, and a release solenoid located on the deck lid latch assembly.
Power for the switch is supplied on circuit F35. This circuit is HOT at all times and protected by a 20 Amp circuit breaker located in cavity 18 of
the junction block. The F35 circuit is spliced and supplies power for the power seats.
Power for the circuit breaker is supplied on circuit A3. This circuit is HOT at all times and protected by a 40 Amp fuse located in cavity 15 of the
Power Distribution Center (PDC).
When the switch is CLOSED, power flows through the switch to circuit Q2. The Q2 circuit connects from the switch to the deck lid release
solenoid. Ground for the solenoid is supplied on circuit Z1.
