chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Convertible Top - Does Not Fold Properly|Page 7638 > < Convertible Top - Does Not Fold Properly|Page 7632
Page 1
background image

Convertible Top Canvas: All Technical Service Bulletins
Convertible Top - Does Not Fold Properly

NO: 23-32-97

GROUP: Body

EFFECTIVE DATE: Jun. 20, 1997

SUBJECT: 
Top Does Not Fold Properly And/Or Lining Protrudes Outside Window With Top Raised

MODELS: 
1996 - 1997 (JX)

Sebring Convertible

NOTE: 

THIS BULLETIN APPLIES TO VEHICLES BUILT PRIOR TO MARCH 30, 1997 (MDH 03-30-XX).

SYMPTOM/CONDITION:

The top folds improperly when lowered, causing corners to stick up. The top lining may also protrude around the side and quarter windows when the top
is raised.

DIAGNOSIS:

Inspect the top in the raised position, if top lining is protruding from around the windows (Figure 1), perform the repair procedure. Inspect the top in the
lowered position, if the corners are sticking up, perform the repair procedure.

PARTS REQUIRED:

1

05003813AA

Elastic Strap Kit, Convertible Top

REPAIR PROCEDURE:

This bulletin involves the installation of an elastic strap to each side of the top cover.

1.

Raise the convertible top half way up. Stop with the top rail in a vertical position. Figure 1

2.

Locate the main control link shown in Figure 1.

Convertible Top - Does Not Fold Properly|Page 7638 > < Convertible Top - Does Not Fold Properly|Page 7632