Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Technical Service Bulletin # 23-06-98
Date: 980206
Convertible Top - Binds/Inoperative/Fluid Leaks
NO: 23-06-98
GROUP: Body
DATE: Feb. 6, 1998
SUBJECT:
Convertible Top Binds/Inoperative
MODELS:
1996 - 1998 (JX) Sebring Convertible
SYMPTOM/CONDITION:
The convertible top binds or becomes inoperative while raising or lowering and/or hydraulic leaks from or around the hydraulic cylinder.
DIAGNOSIS:
Put the top down and lower the rear windows, inspect the hydraulic cylinder mounting bracket stud. If the nut is loose, missing or signs of a hydraulic
fluid leak are found, perform the Repair Procedure.
PARTS REQUIRED:
2
06100517
Nut & Washer, Cylinder Mounting Bracket Attachment
AR
04658958
Cylinder Mounting Bracket
AR
05010041AC
Hydraulic Cylinder (1998 Model Year)
AR
04864770
Hydraulic Cylinder (1996 - 1997 Model Years)
AR
04864769
Hydraulic Hose Kit (Upper and Lower Included)(1996-1997 MY)
AR
05010040AA
Hydraulic Hose Kit (Upper and Lower Included)(1998 MY)
AR
NPN
Dexron 2 - Automatic Transmission Fluid ( For Hydraulic Pump)
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-44-22-90
1.5 Hrs.
FAILURE CODE: P8 - New Part
Repair Procedure
This bulletin involves replacing both of the hydraulic cylinder mounting bracket nuts and washers and as needed replacing the hydraulic cylinders and
hose kit.
1.
If the hydraulic cylinder mounting nut or bracket is missing, inspect the area for signs of hydraulic fluid. If hydraulic fluid is found, determine
where the fluid is coming from and replace the component(s) using the following repair procedure.
2.
Close and latch the convertible top to access the rod eye bolts.
3.
Disconnect the battery negative cable.
4.
Remove the left and right side rod eye bolts.
5.
Manually open the convertible top.
6.
Remove the rear seat cushion, seat back, and inner quarter trim panels.
