Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Thermostat: Service and Repair
REMOVAL
1. Drain cooling system to the thermostat level or below.
Figure 35
2. Remove inlet hose and bolts from coolant elbow. Remove elbow.
3. Remove thermostat assembly, and clean sealing surfaces.
INSTALLATION
Figure 36
1. Install thermostat into the recess in the thermostat housing. Install inlet elbow and tighten the bolts to 12 Nm (133 inch lbs.).
2. Fill cooling system.
