Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Air Door Actuator / Motor: Description and Operation
CIRCUIT OPERATION
Mode Door Actuator (Manual A/C)
The mode door actuator is located on the lower left side of the A/C-Heater housing. This actuator controls the position of the panel/bi-level door
and the floor/defrost door.
Power for the mode door actuator is provided by the control head on the C26 circuit. This is a 5 Volt feed.
Circuit C35 is the mode drive circuit from the control head to the actuator.
The C37 circuit is the feedback from the actuator to the control head. The control head uses this information to adjust the door to the proper
position.
Circuit C57 is the sensor return to the control head. This circuit is spliced with the blend air door actuator.
Circuit C34 is the common line that is spliced, and connects, to the blend air door actuator and the recirculation door actuator.
