Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Tail Lamp: Description and Operation
Tail Lamps and Rear License Plate Lamp
CIRCUIT OPERATION
Circuit A13 in the Power Distribution Center (PDC) powers a 20 Amp fuse located in cavity 7 of the junction block. The A13 circuit is protected
by a 40 Amp fuse located in cavity 12. Circuit F33, which connects to the other side of the fuse in the junction block, connects to the headlamp
switch and is spliced to provide power for the instrument cluster.
The headlamp switch has three positions: OFF, PARK (parking lamps), and ON. When the headlamp switch is in the PARK or ON position, it
connects circuit F33 to circuit L7. From the headlamp switch, circuit L7 splices to power the front parking lamps, rear tail lamps, and the license
lamp. It also provides an input to the Body Control Module (BCM) indicating the lamps are ON, to the radio for illumination, and to the dimmer
switch.
