Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
7.
Position the new tail lamp assembly and bulb wire harness into the vehicle.
8.
Connect the bulb wire harness connector. If installing the left side tail lamp assembly, route the license plate bulb and connect.
9.
Install the plastic nuts holding tail lamp to rear closure panel in the following order: outboard, center and inboard.
10.
Install the trunk lining.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
08-50-65-94
0.2 Hrs.
Replace Rear Taillamp Assembly (Right Side)
08-50-65-95
0.3 Hrs.
Replace Rear Taillamp Assembly (Left Side)
FAILURE CODE:
P8 - New Part
