Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
PARTS REQUIRED:
REPAIR PROCEDURE:
This bulletin involves the replacement of the front seat back cover with a new seat back cover. The new seat back cover has increased seat material
retainers at the bezel opening.
1.
Remove and replace the front seat back cover following the procedures found in the 1997 Sebring Convertible Service Manual (Publication No.
81-270-7122) pages 23-13 to 23-14.
CAUTION:
BEFORE REMOVING THE SEAT BELT ANCHOR BOLT, CLAMP THE SEAT BELT SO IT WILL NOT FULLY RETRACT INTO THE
ANCHOR UNIT.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-20-31-94
1.2 Hrs.
Replace Front Seat Back Cover - Right Side
23-20-31-95
1.2 Hrs.
Replace Front Seat Back Cover - Left Side
FAILURE CODE: P8 - New Part
