Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Fig. 1 Engine Coolant Temperature Sensor
The Engine Coolant Temperature (ECT) sensor is located next to the thermostat housing Fig. 1.
REMOVAL
1. Drain cooling system until coolant level is below engine coolant temperature sensor. Refer to Cooling System.
2. Disconnect electrical connector from sensor.
3. Remove sensor from engine.
INSTALLATION
1. Install ECT sensor to 7 Nm (60 in lb) torque.
2. Connect electrical connector to sensor.
3. Fill cooling system. Refer to Cooling System.
