Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Key Reminder Switch: Description and Operation
CIRCUIT OPERATION
The Key-In chime is used to indicate to the operator that the key is in the ignition with the driver's door OPEN. If the key is in the ignition, a
ground path is completed from the G26 circuit at the Body Control Module (BCM), through the CLOSED switch, to the Z1 circuit. The Z1 circuit
is the ground circuit and terminates at the body ground located at the left kick panel.
When the driver's door is open the normally OPEN door ajar switch CLOSES completing a path to ground on circuit G75. The BCM processes
this information and turns on the chime.
