chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Door Window - Binding/Crunching Noise|Page 8455 > < Door Window - Binding/Crunching Noise|Page 8449
Page 1
background image

Window Regulator: All Technical Service Bulletins
Door Window - Binding/Crunching Noise

NO: 23-62-96

GROUP: Body

DATE: Oct. 11, 1996

SUBJECT: 
Binding Or Crunch Type Noise When Door Glass Is Raised Or Lowered

MODELS: 
1996 - 1997 (JX) Sebring Convertible

NOTE

THIS BULLETIN APPLIES TO VEHICLES BUILT PRIOR TO September 2, 1996 (MDH 09-02-XX).

SYMPTOM/CONDITION:

When raised or lowered the front door glass may bind or make a crunch type noise.

DIAGNOSIS:

Cycle both windows up and down for at least 2 cycles, if the noise is heard perform the Repair Procedure.

PARTS REQUIRED:

1

04886360AA

Regulator Assembly, Right Front Door

1

04886361AA

Regulator Assembly, Left Front Door

REPAIR PROCEDURE:

This bulletin involves the replacement of the front door regulator assemblies.

1.

Lower the door glass 3/4 of the way down.

2.

Remove door trim panel, speaker, speaker bracket and water shield.

3.

Disconnect wire connector to the power window motor.

4.

Remove the screws holding the regulator lift channel to the door glass.

5.

Secure the door glass in upward position.

Door Window - Binding/Crunching Noise|Page 8455 > < Door Window - Binding/Crunching Noise|Page 8449