Sebring Convertible V6-2.5L VIN H (1997)
Input Rod Retaining Pin
4. Remove the retaining clip from the brake pedal pin using following procedure. Position a small screwdriver between the center tang on the
retaining clip and the brake pedal pin. Rotate blade of screwdriver enough so center tang on retaining clip can pass over end of brake pedal pin.
Then pull retaining clip off brake pedal pin.
5. Remove the nut from the brake pedal pivot pin.
6. Remove bake pedal pivot pin from the brake pedal and pedal mounting bracket.
7. Remove brake pedal from mounting bracket.