Sebring Convertible V6-2.5L VIN H (1997)
Parking Brake Cable: Service and Repair
Cable Removal
NOTE: Remove only one rear park brake cable from the vehicle at a time. Failure to do so will result in high efforts required to connect the park brake
cables to the tension equalizer and the park brake lever at the rear wheel brakes. For servicing of either the left or right rear park brake cable, follow the
procedure as listed below.
PROCEDURES
Shift Knob Retaining Screw
1. Remove the shift knob from the shifter. The gear shift knob is attached to the shifter using a set screw. Access to the set screw is from the front of
the shift knob and is removed using a 2 mm alien wrench.
Shift Range Indicator
2. Remove the shift range indicator from the center console. The shift range indicator is attached to the center console using retaining clips. It is
removed by carefully prying it off the center console. The shift range indicator covers the 2 attaching screws for the center console.