Sebring Convertible V6-2.5L VIN H (1997)
Center Console Rear Attaching Screws
23. Install the 3 screws attaching the rear of the center console to the console bracket.
Shift Range Indicator
24. Install the transmission range indicator in the center console.
25. Install the shift knob on the shifter. Install and securely tighten the shift knob retaining screw.
26. Fold the carpeting back into position on the rear floor of the vehicle.
27. Install the 2 clips attaching the carpeting to the cross car beam.
28. Install the 2 wiring harness routing clips on the cross car beam.
29. Install the quarter trim panels.
30. Install both door sill plate scuff moldings, by snapping them onto the door sills.
31. Install lower rear seat cushion. Be sure lower seat cushion is fully installed in retainers on floor pan of vehicle.