Sebring Convertible V6-2.5L VIN H (1997)
17. Install the mounting bracket for the throttle cable and speed control cable onto the intake manifold and securely tighten the mounting bolts.
18. Install the throttle cable, and if equipped, the speed control cable on the cam of the throttle body assembly.
Engine Air Intake System Components
19. Install the air cleaner lid, air inlet hose and air chamber as an assembly on the engine. Latch lid of air cleaner to air cleaner housing. Securely
tighten the clamp attaching the air inlet hose to the throttle body. Install and securely tighten the bolt attaching the air chamber to the intake
manifold.
Ground Cable Attachment At Strut Tower
20. Install the remote ground cable on the ground stud located on the left strut tower. Install and securely tighten the ground cable attaching nut.
21. Check brake light switch for correct adjustment. If required, adjust stop lamp switch as necessary. Refer to Lighting and Horns Brake Light
Switch.
22. Road test vehicle to ensure proper operation of the vehicles brake system.
