Sebring Convertible V6-2.5L VIN H (1997)
Cruise Control Switch: Service and Repair
Speed Control Switch
The speed control switches are mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY REFER TO AIRBAGS AND SEATBELTS/AIRBAGS
REMOVAL
1. Turn off ignition.
2. Remove two screws from side of each switch.
3. Rock switch away from airbag and steering wheel.
4. Disconnect two-way electrical connector.
5. Repeat for the other switch.
INSTALLATION
-
For installation reverse above procedures.
