Sebring Convertible V6-2.5L VIN H (1997)
Brake Light Bulb: Service and Repair
REMOVAL
1. Release trunk latch and open trunk lid.
2. Remove trunk lining as necessary to gain access to tail lamp nuts.
3. Remove plastic nuts holding tail lamp to rear closure panel.
4. Separate lamp from opening in quarter panel.
5. Rotate socket counterclockwise one quarter turn.
Tail, Stop, And Turn Signal Lamp Bulb
6. Pull socket from back of lamp.
7. Pull bulb from socket.
INSTALLATION
1. Push bulb into socket.
2. Push socket into back of lamp.
3. Rotate socket clockwise one quarter turn.
4. Position lamp to opening in quarter panel.
5. Install plastic nuts holding tail lamp to rear closure panel.
6. Install trunk lining.
