Sebring Convertible V6-2.5L VIN H (1997)
Fig. 21 Fuel Pressure Regulator Removal
2. Pry fuel pressure regulator out of housing Fig. 21.
3. Ensure both upper and lower 0-rings are removed from regulator housing and discarded.
Fig. 22 Fuel Pressure Regulator O-Rings
INSTALLATION
1. Lightly lubricate the 0-rings with engine oil and place them into opening in regulator housing Fig. 22.
2. Push and rotate regulator into regulator housing.
3. Install new regulator retainer bracket making sure all 4 locking tabs snap into place.
