chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Headlamp Control Module > < Daytime Running Lamp Control Unit|Description and Operation
Page 1
background image

Daytime Running Lamp Control Unit: Testing and Inspection

-

Check the parking brake switch operation.

-

Check the 15 Amp fuse in cavity 4 of the junction block.

-

Check the 40 Amp fuse located in cavity 14, and 15 of the PDC. If this fuse is blown the headlamps will not operate.

-

Check the headlamp grounds located at the left strut tower and the right frame rail.

Headlamp Control Module > < Daytime Running Lamp Control Unit|Description and Operation