Sebring Convertible V6-2.5L VIN H (1997)
a. Check for continuity between pin 62 and pin 3 of the stop lamp switch connector. If no continuity, repair as necessary
b. If continuity, perform Stop Lamp Switch Test.
9. If the Stop Lamp Switch Test is OK, check for continuity between pin 6 of the stop lamp switch and ground. When the pedal is depressed, the
meter should show open circuit. If no continuity repair as necessary. If OK, go to step 8.
10. Using an ohmmeter, touch one lead to a ground and touch the other lead to pin 76. The meter should show no continuity when transmission is in
DRIVE and continuity when in PARK or NEUTRAL. If not, test Neutral Start and Back-Up switch using scan tool.