Sebring Convertible V6-2.5L VIN H (1997)
Power Steering Line/Hose: Service and Repair
Power Steering Fluid Cooler Lines
Removal
1. Remove the intermediate steering shaft coupler from the steering gear shaft.
2. Siphon as much power steering fluid as possible from the power steering fluid reservoir.
3. Raise the vehicle using a frame contact type hoist or supported as required using jack stands.
4. Remove the left front wheel/tire.
5. Remove the front fascia and the grill as an assembly from the vehicle.
6. Remove the hose clamps from the power steering fluid hoses. Drain power steering fluid from the hoses and the power steering fluid cooler.
7. Remove the bracket attaching the power steering fluid cooler lines to the left front frame rail.
8. Lower the front suspension crossmember. Refer to the steering gear service procedures in this group of the service manual for the required
procedure for the removal of the front suspension crossmember.