Sebring Convertible V6-2.5L VIN H (1997)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley Replacement
NOTE: The power steering pump must be removed from the vehicle for removal of the power steering pump pulley.
REMOVAL
1. Remove power steering pump from engine.
CAUTION: Do not hammer on power steering pump pulley or shaft remove power steering pump pulley. This will damage the pulley and the
power steering pump.
2. Mount Puller, Special Tool C-4333 or C-4068, or equivalents on power steering pump pulley. Mount power steering pump and puller in a vise to
keep shaft of power steering pump from turning when-removing pulley.
3. Remove the drive pulley from the shaft of the power steering pump.
4. Replace power steering pump pulley if bent, cracked, or loose.
CAUTION: Do not hammer on power steering pump pulley or shaft to remove power steering pump pulley. This will damage the pulley and the power
steering pump.
INSTALLATION
1. Mount power-steering pump in a vise using the power steering pump mounting bracket.
2. Place power steering pump pulley squarely on end of power steering pump shaft.