Sebring Convertible V6-2.5L VIN H (1997)
pump.
4. Raise vehicle.
5. Remove right front tire from vehicle.
6. Remove accessory drive splash shield from the right front wheel well.
7. Remove the power steering fluid pressure hose from pressure fitting on power steering pump. Let remaining popover steering fluid drain out of the
power steering fluid supply hose, power steering pump and power steering fluid pressure hose. After power steering fluid has drained out of pump
and hose, install a cap on the power steering pressure hose and a plug in the power steering pump pressure fitting.
8. Remove the antilock brakes hydraulic control unit heat shield from the hydraulic control unit mounting bracket.
