Sebring Convertible V6-2.5L VIN H (1997)
Electronic Brake Control Module: Service and Repair
Controller Antilock Brake Location
REMOVE
1. Turn vehicle ignition off.
CAB 60-Way Wiring Harness Connector
2. Disconnect the wiring harness 60 way connector from the Controller Antilock Brake Module (CAB). Verify that the vehicle ignition is off before
removing the 60 way connector.
CAB Bracket To Engine Compartment Mounting
3. Remove the 2 bolts attaching the CAB mounting bracket to inner fender and front upper crossmember.
4. Remove the CAB from the vehicle.
INSTALL
