Sebring Convertible V6-2.5L VIN H (1997)
9. Install disc brake caliper assembly on steering knuckle. Caliper is installed by first sliding top of caliper under top abutment on steering knuckle.
Then installing bottom of caliper against bottom abutment of steering knuckle.
10. Install the disc brake caliper-guide pin bolts. Tighten caliper assembly guide pin bolts to a torque of 31 Nm (23 ft. lbs.).
11. Clean all foreign matter from the threads of the outer C/V joint stub axle. Install washer and hub nut onto stub axle and tighten nut.
12. With vehicle brakes applied to keep braking disc from turning, tighten hub nut to 203 Nm (150 ft. lbs.) of torque.
