Sebring Convertible V6-2.5L VIN H (1997)
13. Remove the coil spring isolator from the lower spring seat on the shock absorber.
14. Inspect the shock absorber for any condition of shaft binding over the full stroke of the rod.
15. Inspect all disassembled components for signs of abnormal wear or failure, replacing any components as required. Inspect shock absorber for signs
of abnormal oil leakage and for loss of gas charge. To check for loss of gas charge in shock absorber, push the shaft of the shock absorber in and
release, the shaft should return to its fully extended position. If shaft does not return to its fully extended position replace the shock absorber.
16. Remove the upper bushing and sleeve from the shock absorber mount.
17. Remove the lower bushing from the rear shock absorber mount.
18. Inspect the rear shock absorber mount, upper and lower bushings, and upper and lower spring isolators for the following:
-
Mount for cracks and distortion and locating studs for any sign of damage.
-
Severe deterioration of the upper or lower coil spring isolators.
-
Deterioration of the shock absorber rod to shock absorber mounting bracket bushings.
-
Inspect dust shield for rips and/or deterioration.
-
Inspect jounce bumper for cracks and signs of deterioration.
