Sebring Convertible V6-2.7L (2009)
Trunk / Liftgate Hinge: Service and Repair
Decklid Hinge - Removal
REMOVAL
1. Open decklid.
2. Mark outline of hinge (2) on quarter panel trough and inside of decklid (1).
3. Place a padded block between the deck panel and the decklid.
4. Remove the gas prop See: Trunk / Liftgate Shock / Support/Service and Repair/Gas Prop - Removal.
5. Remove bolts attaching hinge to decklid (1).
6. Place decklid against padded block and hold it steady.
7. Remove bolts attaching hinge to quarter panel trough.
8. Remove hinge from vehicle.
