Sebring Convertible V6-2.7L (2009)
7. Remove the center floor console and place it on a workbench See: Trim Panel/Service and Repair/Shifter Housing - Removal. Use care to protect
the console from cosmetic damage.
8. Disconnect the 3 way wire harness connector (4) from the heated/cooled cupholder See: Service and Repair/Heated/Cooled Cupholder - Removal.
9. Using a DVOM, check circuit F929 (pin 1), circuit E12 (pin 2) and circuit Z907 (pin 3) for continuity between the 3 way connector and connector
C300. If OK, replace the heated/cooled cupholder See: Service and Repair/Heated/Cooled Cupholder - Removal. If not OK, repair the console
wire harness as required.