Sebring Convertible V6-2.7L (2009)
1. Place the convertible top in the full open position. Ensure the top is completely stowed into the trunk area.
2. Using a trim stick or equivalent, pry the rear shelf trim.
3. Remove the rear seat cushion.See: Seats/Seat Cover/Service and Repair/Seat Cushion Cover - Removal.
4. Remove rear seat back. See: Seats/Seat Back/Service and Repair/Seat Back - Removal
5. Using a trim stick or equivalent, pry up on the armrest/cup holder and remove from the quarter trim panel.
6. Remove the one screw (1) from the quarter trim panel.
7. Using a trim stick or equivalent, gently pry out on the quarter trim panel (1) and remove from vehicle.
Flipper Door
FLIPPER DOOR