Sebring Convertible V6-2.7L (2009)
1. If equipped, connect center console housing wire connector (5) with instrument panel connector (1).
2. Place console housing (7) over shifter lever (3) ensuring console tabs seat properly.
3. Install four screws (9) in the console compartment.
4. Install two screws (8) in the front of the console.
5. Install console bezel See: Console/Service and Repair/Center Console Bezel - Installation.
6. Replace shift bezel and knob See: Shifter Bezel - Installation.
SEBRING
1. If equipped, connect center console housing wire connector (2) with instrument panel connector.
2. Place console housing (6) over shifter lever ensuring console tabs seat properly.
