chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Power Lock Switch - Removal|Page 7442 > < Driver Window/Door Lock Switch (JS27) (Driver Door) 12 Way|Page 7439

Sebring Convertible V6-2.7L (2009)

Page 1
background image

Power Door Lock Switch: Service and Repair
Power Lock Switch - Removal

REMOVAL

1. Disconnect and isolate the battery negative remote cable.
2. Remove door trim panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim Panel - Removal.
3. Disconnect switch wire connector.
4. Remove switch using a trim stick (special tool #C-4755) or equivalent.

Power Lock Switch - Removal|Page 7442 > < Driver Window/Door Lock Switch (JS27) (Driver Door) 12 Way|Page 7439