Sebring Convertible V6-2.7L (2009)
3. Route the cable on the inner quarter panel as shown.
4. Position the assembly onto the inner quarter panel using the marks made during removal. Install the bracket retaining bolts (1).
5. Attach the cable (3) on the latch assembly bracket (2).
6. Cycle the power folding top and ensure proper alignment of the decklid assembly.
7. Install the side and rear trunk trim panels. See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and
Repair/Trunk Trim Panel - Installation.
8. Close the rear decklid.