Sebring Convertible V6-2.7L (2009)
Convertible Top Control Module: Service and Repair
Power Top Control Module - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the left lower quarter trim panel, See: Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment Trim/Quarter Trim
Panel - Removal.
3. Disconnect the Power Top Control Module (PTCM) electrical connectors (3).
4. Remove the two PTCM retaining nuts (2).
5. Remove the PTCM (4) from the vehicle.