Sebring Convertible V6-2.7L (2009)
1. Disconnect and isolate the battery negative remote cable.
2. Remove the decklid See: Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Decklid - Removal.
3. Remove the rear and side trunk trim panels. See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and
Repair/Trunk Trim Panel - Removal.
4. Disconnect the deckbar hydraulic cylinders on both the left and right sides (3) See: Convertible Top Hydraulic Cylinder/Service and Repair/CST
And RHT Common Components/Folding Top Hydraulic Cylinder - Removal.
5. Remove the mounting fasteners (2) and remove the MOAB bracket (1) mounting cover (3).
6. From the right side, unclip the decklid harness from the deckbar.
7. With a grease pencil or equivalent, mark the placement of the rear hinges onto the body.
