Sebring Convertible V6-2.7L (2009)
16. Position the left sunvisor (2) into the vehicle.
17. Connect the left sunvisor electrical connector (3).
18. Install the left sunvisor retaining screws (1).
19. Repeat the installation procedure for the right sunvisor.
20. Connect the battery negative cable.
Deck Bar Cylinder Position
INSTALLATION
1. Position the deckbar cylinder position switch (2) onto the deckbar cylinder (3) in the vehicle trunk area.
2. Secure the position switch to the deckbar cylinder. Push the switch retainer (4) over the switch (2). Push the position switch retainer locking tab
(1) towards the retainer (4) until the two are fully engaged.