Sebring Convertible V6-2.7L (2009)
Convertible Top Switch: Service and Repair
Power Top Switch - Installation
INSTALLATION
1. From the rear of the switch bezel (3), gently push the power top switch in until it is secured by the two retaining tabs (4).
2. Connect the power top switch electrical connector (1).
3. Connect the decklid release switch electrical connector (2) - if equipped.
4. Gently press the switch bezel into the instrument panel (5) until it is secured by the retaining tabs.
5. Connect the battery negative cable.
6. Verify power top system operation.
