Removing Seat Back Cover on 2009 Sebring Convertible: Service and Repair | 7792
9. Engage the seat back cover J-clip (2).
10. Engage the seat cushion J-clip (1).
11. Install the retractor to the mounting bracket and install the seat belt retractor mounting bolt (3).
12. Install airbag harness to the seat cushion pan.
13. Install the lower inner shield (2) and fasteners (1).
14. Engage seat back cover (1) J-clips.
15. Install the lower outer shield (2).
16. Install the seat side shields. See: Seat Cushion/Service and Repair/Seat Cushion Side Shields - Installation.
17. Install the seat to the vehicle. . See: Service and Repair/Seat - Installation
Rear