Sebring Convertible V6-2.7L (2009)
4. Access and remove the drum brake shoes (6) from the support plate (2) See: Brake Shoe/Service and Repair/Removal and Replacement/Removal.
5. Position a 10 mm box wrench (2) over the retainer fingers on the end of the parking brake cable housing (1). Compress the cable housing retaining
fingers with the wrench, then pull the cable housing out of the support plate.
6. Disconnect the brake tube (2) at the wheel cylinder.
7. Remove the wheel cylinder attaching screws (1).
8. Remove the wheel cylinder from the support plate.
