Sebring Convertible V6-2.7L (2009)
Camshaft: Procedures
INSPECTION
1. Inspect camshaft bearing journals (2) for damage and binding. If journals are binding, check the cylinder head for damage. Also check cylinder
head oil holes for clogging.
2. Inspect camshaft sprockets for excessive wear. Replace camshafts if necessary.
3. Check the cam lobe surfaces for abnormal wear and damage. Replace camshaft if defective. Measure the actual wear and replace, if out of
limits-standard value is 0.0254 mm (0.001 in.); wear limit is 0.254 mm (0.010 in.).
