Sebring Convertible V6-2.7L (2009)
7. For engines equipped with silent chains (late production), rotate the cams so that the marked links (1) and dots (2) are facing the 12:00 O'clock
position.
8. Install cams to cylinder head. Verify that rocker arms are correctly seated and in proper positions.
9. Install camshaft bearing caps. Verify that bearing caps are installed in same position as removed.
10. Tighten cam bearing cap bolts gradually in sequence shown to 12 Nm (105 in. lbs.).
11. Install secondary chain tensioner bolts and tighten to 12 Nm (105 in. lbs.).
12. Remove locking pin from secondary tensioners.
13. Verify end play of camshafts are within specification See: Specifications/Engine - Specifications.
14. Install the primary timing chain See: Timing Components/Timing Chain/Service and Repair/Timing Chain & Sprockets - Installation.
