Sebring Convertible V6-2.7L (2009)
4. Reposition the left engine harness (3), and install the left engine harness retainers (1) to the double-ended studs.
5. Install the ignition coils See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil - Installation.
6. Install ignition coil capacitor and fastener.
7. Reconnect all electrical connectors.
8. Install ground strap to cylinder head cover stud.
9. Install the makeup air hose.
10. Connect negative battery cable.
Right Cylinder Head Cover(s)
INSTALLATION
