Sebring Convertible V6-2.7L (2009)
5. Remove the two intake manifold support brackets (1).
6. Disconnect the electrical connectors from the Manifold Absolute Pressure (MAP) sensor (2) and the Electronic Throttle Control (ETC) (3).
7. Disconnect the Positive Crankcase Ventilation (PCV) hose (1).
8. Remove the seven manifold attaching bolts in reverse of the tightening sequence shown.
9. Remove the upper intake manifold.
Intake Manifold Lower
LOWER
1. Release fuel system pressure.
2. Remove upper intake manifold See: Intake Manifold - Removal.
