Sebring Convertible V6-2.7L (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Hose - Installation
Pressure Hose
2.7L ENGINE
CAUTION: Power steering fluid hoses must remain away from the exhaust system, driveshafts, vehicle components and any unfriendly surface
that can possibly damage the hoses.
1. Install the pressure hose tube (4) at the gear. Tighten the tube nut (3) to 32 Nm (24 ft. lbs.).
2. Install the return hose tube (1) at the gear. Tighten the tube nut (2) to 32 Nm (24 ft. lbs.).
3. Position the power steering hose routing clamps (2) on the crossmember. Install and tighten the screws to 8 Nm (71 in. lbs.).
