Sebring Convertible V6-2.7L (2009)
Wheel Bearing: Service and Repair
Rear Hub and Bearing - Removal
FRONT-WHEEL-DRIVE
NOTE: Before proceeding, See: Steering and Suspension/Suspension/Service Precautions/Vehicle Damage Warnings .
1. Raise and support the vehicle. See:
2. Remove the wheel mounting nuts (3), then the rear tire and wheel assembly.
3. If equipped with rear disc brakes, access and remove the rear brake rotor (3). See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Removal
4. If equipped with rear drum brakes, access and remove the rear brake drum. See: Brakes and Traction Control/Drum Brake System/Brake
Drum/Service and Repair/Removal and Replacement/Removal
5. Remove the screw (1) fastening the wheel speed sensor (2) head in the rear of the hub and bearing.
