Sebring Convertible V6-2.7L (2009)
5. Install the set screw (1) at manual lever (2) and tighten to 1 Nm (10 in. lbs.).
6. Install the park rod assembly (2) to the TRS/rooster comb (1) and place the park rod assembly into the guide assembly.
7. Place the park pawl pin into the park pawl tube.
8. Install the electrical connector.
9. Install the valve body See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/62TE Automatic Transaxle/Valve Body - Installation.
