Sebring Convertible V6-2.7L (2009)
Overdrive Solenoid: Service and Repair
Transmission Solenoid and Pressure Switch Assembly - Installation
INSTALLATION
NOTE: If solenoid/pressure switch assembly is being replaced, it is necessary to perform the "Quick-Learn" procedure See: Computers and
Control Systems/Testing and Inspection/Programming and Relearning/Powertrain Control Module - Programming/Quick Learn Procedure .
1. Install solenoid/pressure switch assembly and new gasket to transaxle.
2. Install and torque three bolts (1) to 12 Nm (105 in. lbs.).
