Sebring Convertible V6-2.7L (2009)
Child Seat Tether Attachment: Service and Repair
Upper Child Tether Cover - Removal
REMOVAL
1. Open the Child Tether Cup Cover to the full open position (1).
2. Put one hand underneath the shelf trim panel to catch the push fastener, then grasp the tether anchor cover with the other hand and pull up and
forward, snapping the pivot pin and retainer.
NOTE: The cover is not reusable. If removed, a new one must be reinstalled. There should be no reason to reuse an old one as a new shelf
panel will come with a new cover plate on it.
